Sony TV Instructions

Before you start, be sure to use the correct remote. In this case, the key buttons to look for on the remote are the “Menu” or “Home” button (in most cases this button is light blue, and part of a circle of buttons around the directional arrows), the directional arrows (up, down, left, right) and the “OK” or “Enter” button, which is usually in the middle of the directional buttons, sometimes this is represented by a “+”. You will use these buttons as needed to navigate to and then select different options on screen. In general, use the “OK”/”Enter”/”+” button to select each option.

Most Sony TVs call their rescan function "Auto Program"

1. Press the "Home" button on your remote
2. Choose "Settings"
3. Select "Channel Setup" then "Auto Program"

SONY ANDROID TVs (Smart TVs that connect to the internet)

1. Press the HOME button on the remote control.
2. Select Settings.
3. This step will vary depending on the options available in your TV menu. Follow the steps accordingly.

  • Select Channels → Channel setup
  • Select Watching TV → Channels → Channel setup

4. Select Auto Program.

OTHER SONY TVs

1. Using your remote or the buttons on the TV itself, locate the Menu or Home button.
2. Use the up, down or left and right buttons to move through the on-screen menu and locate the Set up or Settings menu. NOTE: All TVs are different in terms of the auto program procedures. This is a general guide, but the steps or the terminology may be different for your model.
3. Select System or Channels.
4. Select Program channels, Auto program, or Digital scan
5. Press Select, Enter or OK to start the scan.

For Sony’s Support site, click here>>